SKU: 43696604501

LCD Screen and Digitizer Full Assembly for Apple Watch SE 2022 40mm, For Apple Watch SE 2022 40mm

Sale price$61.20 Regular price$68.00
Save 10%

Shipping Estimate
USA
  • USA
  • CAN

Ships within 48 hours · Estimated delivery Jul 10 - Jul 15

Promo Codes Available:

For Your Every Summer RSVP, with Code: SUMMER15

Description

LCD Screen and Digitizer Full Assembly for Apple Watch SE 2022 40mm, For Apple Watch SE 2022 40mmBefore Installation Notes Tips 1: Test before installation When testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity. Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone. Ensure you wear eye protection and use caution not to cut your finger with the glass

Before Installation Notes
Tips 1: Test before installation
When testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity.
Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone.
Ensure you wear eye protection and use caution not to cut your finger with the glass splinters.
Tips 2: Simulates testing
Screen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed.
Tips 3: Do not over-bend cable
Please make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display.


About the product
1. Replacement LCD Screen + Touch Screen Digitizer Assembly for Apple Watch SE 2022 40mm
2. Replace your broken or unusable item with a new one
3. Make your device look more refreshing than ever
4. Completely fit and work
5. Each item has been checked and in good condition before shipping
6. Professional installation is highly recommended. We will not be responsible once the screen is installed


Specification:
General
Compatible with
Apple: Watch SE 2022 40mm
Package Weight
One Package Weight 0.10kgs / 0.22lb
One Package Size 20cm * 10cm * 3cm / 7.87inch * 3.94inch * 1.18inch
Qty per Carton 40
Carton Weight 4.20kgs / 9.26lb
Carton Size 42cm * 32cm * 32cm / 16.54inch * 12.6inch * 12.6inch
Loading Container 20GP: 620 cartons * 40 pcs = 24800 pcs
40HQ: 1439 cartons * 40 pcs = 57560 pcs

Shipping Notes
  • Free Standard Shipping on $100+ Orders to the USA.
  • Except Preorder products are shipped in 48 hours.
  • Delivery to the USA:
  1. Standard Shipping : 3-10 business days
  • If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy
SKU: 43696604501

Discover Niche Categories That Outsell

Top-Converting Item to Boost Your Average Order

4.2 ★★★★★
Based on 1108 reviews
Sort
Highest Rating
Newest First
Oldest First
Product Reviews
M
Verified Purchase
Miguel
Belleville, US
★★★★★ 5
Great wiring harness for light installations.
Size: 16AWG Wiring Harness-2 Leads, Size: 16AWG Wiring Harness-2 Leads
This is a great wiring harness for LED lights. These come in one or two leads application. All that means is that they come ready for one or two lights, depending on your installation. The plug in connectors for each light comes with the set so that is a plus. I’ve attached a picture of the plug/connector for the lights so you can take a look at them. Although the relay is an “overkill” for low wattage LEDs, it’s OK to have it just in case you decide to change your lights for larger ones or halogens, in the future. In my case I will be using this harness in my motorcycle. It is very long for my need, which is great for cars, but too long for motorcycles since you have to remember that room/space is scarce in motorcycles. I ended up cutting the wires to my desired length and using heat shrink butt connectors and “glued” heat shrink covers for waterproofing the connection points. All in all these are great quality and I am very happy with them.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on December 16, 2020
M
Verified Purchase
Marina De Leon
Lexington, US
★★★★★ 5
Nice
Size: 16AWG Wiring Harness-2 Leads
Worked great, easy to install
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on January 8, 2026
D
Verified Purchase
Dan from Georgia
Chelsea, US
★★★★★ 4
Wire length between the two connectors is short for a full-size pickup
Size: 16AWG Wiring Harness-2 Leads
I used the harness to wire ditch lights on opposite sides of a full-size pickup (F150). The wire between the 2 2-pin connectors was about 18 inches too short. Fortunately, splicing the wires from the (Nilight) ditch lights and the included pigtails gave barely enough length to reach the connectors. The connectors are buried inside the trim channel for the cowl; I'd have preferred they were exposed on each side to allow for easy swapping of the lights, but I can live with it. There is more than enough wire from the first connector to the relay for my all-under-hood installation, but I didn't think to measure if it would reach into the truck bed. The harness is of good quality and is a very good value. It would be a 5-star if it weren't for that little length issue.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on June 1, 2025
N
Verified Purchase
Nate Higgers
Belleville, US
★★★★★ 5
great value
Size: 16AWG Wiring Harness-2 Leads
very affordable light install kit. worth the price just in the wiring connectors. I used this with my Nilight front bumper kit. i bypassed the button and wired high beam (+) to the yellow small wire. I did this so when the highbeams come on the light bar comes on. because with the stock arragement of this harness, the button continously draws power for the indicator LED
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 30, 2026
L
Verified Purchase
Lee Mintz
Dallas, US
★★★★★ 5
The Easiest!
Size: 16AWG Wiring Harness-2 Leads
This is one of the best and easiest wiring system to install that I have every used. And the price is great!
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on June 11, 2025

recommand products